Pellet Stoves
Pellet stoves offer the warmth of heating with wood along with automatic features such as self-lighting capability and thermostatic regulation. Wood pellets are made from compressed sawdust so this fuel source is 100% recycled and all natural. Pellet appliances are ideal when longer burn times are needed. Most units hold 60-120 lbs of pellets and can last up to several days on a load. They don’t require a chimney to operate. An exhaust/ combustion fan allows for convenient side wall venting. Since pellet stoves use a convection fan to distribute the heat created by a small fire out into the room, the back and sides of the stove don’t get hot, allowing for low clearances to combustible walls.
| Absolute 43 | Allure 50 | ||
 |
45,300 BTUs Heats up to 1,600 sq ft. |
 |
52,600 BTUs Heats up to 2,000 sq ft. |
| For more Harmon pellet | stoves – click HERE | For more Harmon pellet | stoves – click HERE |
|
|
|||
| Harman P68 | Lopi Deerfield | ||
 |
68,000 BTUs Heats up to 2,200 sq ft. |
 |
45,000 BTUs Heats up to 2,000 sq ft. |
| For more Harman pellet | stoves – click HERE | For more Lopi pellet | stoves – click HERE |
|
|
|||
Pellet Inserts
Pellet inserts are designed to fit into most fireplaces, masonry as well as factory built models. While the hoppers and ash pans are smaller to allow the unit to fit inside the existing fireplaces, the heat output is the same as on freestanding models and larger units heat in excess of 2,000 square feet. A stainless steel liner should be used inside the chimney to vent to outside. Some models can also be installed as built-ins, for applications where there currently is no fireplace at all.
Click here for a form to help you measure your masonry fireplace for an insert
Click here for a form to help you measure your metal fireplace for an insert
| Quadrafire Castile | Lopi AGP | ||
 |
34,400 BTUs Heats up to 1,700 sq ft. |
 |
41,000 BTUs Heats up to 2,000 sq ft. |
| For more Quadrafire | inserts – click HERE | For more Lopi pellet | inserts– click HERE |
|
|
|||
| Harman Accentra Insert | |||
 |
52,000 BTUs Heats up to 1,800 sq ft. |
||
| For more Harman pellet | inserts – click HERE |